You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
BinHong Lee b62bd7a589 Set theme jekyll-theme-leap-day 7 jaren geleden
.gitignore Initial commit 8 jaren geleden
Makefile Initial commit 8 jaren geleden
Project.elf Initial commit 8 jaren geleden
Project.hex Initial commit 8 jaren geleden
Project.map Initial commit 8 jaren geleden
README.md Added documentations and instructions to set up 7 jaren geleden
USART.c Initial commit 8 jaren geleden
USART.h Initial commit 8 jaren geleden
_config.yml Set theme jekyll-theme-leap-day 7 jaren geleden
diagram.png Added documentations and instructions to set up 7 jaren geleden
index.md Added documentations and instructions to set up 7 jaren geleden
pinDefines.h Initial commit 8 jaren geleden
sunlightAlarmClock.c Initial commit 8 jaren geleden

README.md

AVR - Sunrise Alarm Clock

The program is written for an ATMEGA168 programmed through an AVR.

For a comprehensive guide (or hardware side tutorial), please go to https://binhonglee.github.io/AVR---Sunrise-Alarm-Clock

Requirements

This program requires the following stuffs to work on your computer:

  • avrdude
  • make
  • cmake
  • UART terminal

Installation

  1. Clone this repository
$ git clone https://github.com/binhonglee/AVR---Sunrise-Alarm-Clock/
  1. (Optional) Check the Makefile to see if it fits your microcontroller and controller.

  2. Open your UART terminal.

  3. Make sure your UART terminal is connected to your USART component.

  4. Flash the microcontroller

$ make flash

Removal

To remove this program from your computer, do the following:

  1. Uninstall every other thing you installed from the requirements that you no longer need.

  2. Delete this folder

$ cd ../
$ rm -rf AVR---Sunrise-Alarm-Clock
Author’s note :

Most of the program has line by line comments written so it shouldn’t be too hard to understand and to tweak it for your use.