binhong
/
SunriseAlarmClock
kopia lustrzana https://github.com/binhonglee/SunriseAlarmClock
1
0
Forkuj 0
Kod Zgłoszenia 0 Wydania 0 Wiki Aktywność
Nie możesz wybrać więcej, niż 25 tematów Tematy muszą się zaczynać od litery lub cyfry, mogą zawierać myślniki ('-') i mogą mieć do 35 znaków.
2 Commity
1 Gałąź
83 KiB
 
 
 
Drzewo: 5ca48473eb
Gałęzie Tagi
${ item.name }
Utwórz gałąź ${ searchTerm }
z '5ca48473eb'
${ noResults }
 ZIP  TAR.GZ
BinHong Lee 5ca48473eb Added documentations and instructions to set up 7 lat temu
.gitignore Initial commit 8 lat temu
Makefile Initial commit 8 lat temu
Project.elf Initial commit 8 lat temu
Project.hex Initial commit 8 lat temu
Project.map Initial commit 8 lat temu
README.md Added documentations and instructions to set up 7 lat temu
USART.c Initial commit 8 lat temu
USART.h Initial commit 8 lat temu
diagram.png Added documentations and instructions to set up 7 lat temu
index.md Added documentations and instructions to set up 7 lat temu
pinDefines.h Initial commit 8 lat temu
sunlightAlarmClock.c Initial commit 8 lat temu

README.md

AVR - Sunrise Alarm Clock

The program is written for an ATMEGA168 programmed through an AVR.

For a comprehensive guide (or hardware side tutorial), please go to https://binhonglee.github.io/AVR---Sunrise-Alarm-Clock

Requirements

This program requires the following stuffs to work on your computer:

  • avrdude
  • make
  • cmake
  • UART terminal

Installation

  1. Clone this repository
$ git clone https://github.com/binhonglee/AVR---Sunrise-Alarm-Clock/

  1. (Optional) Check the Makefile to see if it fits your microcontroller and controller.

  2. Open your UART terminal.

  3. Make sure your UART terminal is connected to your USART component.

  4. Flash the microcontroller

$ make flash

Removal

To remove this program from your computer, do the following:

  1. Uninstall every other thing you installed from the requirements that you no longer need.

  2. Delete this folder

$ cd ../
$ rm -rf AVR---Sunrise-Alarm-Clock
Author’s note :

Most of the program has line by line comments written so it shouldn’t be too hard to understand and to tweak it for your use.